Packet Tracer video tutorial – Getting started

Posted on July 7, 2009. Filed under: CCNA | Tags: , , , |


In my previous post, I promise to provide a helloworld project as excercise. Here we go, in this video, we will connect 3 pc with hub or switch, then test the connect with ping.

Step 1, Put a PC in the workspace.

On the lower-left corner, Click “End Devices” -> drag and drop the “Generic” computer icon to the workspace.

Step 2, Set IP address.

Double click the computer icon, Click “Config” tab, in the “IP Address” text box, input “192.168.10.2”, Click the “Subnet Mask” text box, “255.255.255.0” will be auto-filled.

Step 3, Put two more PCs in the workspace.

Repeat step 1 and step 2, in the “IP Address” text boxes, input “192.168.10.3” and “192.168.10.4” respectively.

Step 4, Put a hub in the workspace.

On the lower-left corner, Click “Hubs” -> drag and drop the “Generic” hub icon to the workspace.

Step 5, Connect hub and PC.

On the lower-left corner, Click “Connections” -> Click the “Copper Straight Through” cable (black real line icon).

In the workspace, Click the hub -> Select one of the FastEthernet port -> Click one of the PC -> Select FastEthernet port

Notice the green dots shall appear in a few seconds.

Step 6, Repeat step 5 for the other two PCs.

Step 7, Ping the PCs.

At the right side of the workpace, Click the envolope icon ->in the workplace, Click PC0, then Click PC1

Notice the successful message at the lower-right corner of the workpace.

The connection for Switch is similar to hub.

Advertisements

Make a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

2 Responses to “Packet Tracer video tutorial – Getting started”

RSS Feed for IT Certifications Comments RSS Feed


Where's The Comment Form?

Liked it here?
Why not try sites on the blogroll...

%d bloggers like this: