Module 6 Exam

Posted on August 28, 2009. Filed under: CCNA | Tags: , , , |


1.

9191[1]

Refer to the exhibit. Host A is communicating with host F. What happens to a frame sent from host A to host F as it travels over the Ethernet segments?

• The frame format is modified as it passes through each switch.

• The frame format remains the same across each Ethernet segment.

• The frame format is modified as the media speed changed at switch B and switch E.

• The frame format is modified as the media material changes between copper and fiber at switch C and switch D.

2. How many hexadecimal digits are in a MAC address?

• 2

• 8

• 12

•16

• 32

3. What are three functions of a NIC in a PC? (Choose three.)

• A NIC connects the PC to the network media.

• A NIC detects collisions on the Ethernet segment.

• A NIC checks the formatting of data before it is transmitted.

• A NIC passes the contents of selected frames to the upper OSI layers.

• A NIC acknowledges and retransmits data that was not received properly.

• A NIC discards frames when the destination IP address does not match the local host.

4. At what layer of the OSI model does a MAC address reside?

• 1

• 2

• 3

• 4

• 7

5. A router has an Ethernet, Token Ring, serial, and ISDN interface. Which interfaces will have a MAC address?

• serial and ISDN interfaces

• Ethernet and Token Ring interfaces

• Ethernet and ISDN interfaces

• Token Ring and serial interfaces

6. In an Ethernet LAN, how does the NIC know when it can transmit data?

• An Ethernet NIC transmits data as soon as the frame is received.

• An Ethernet NIC transmits data as soon as the NIC receives a token.

• An Ethernet NIC transmits data when it senses a collision.

• An Ethernet NIC transmits data after listening for the absence of a signal on the media.

7. Which characteristics describe carrier sense multiple access collision detect (CSMA/CD)? (Choose three.)

• reliable

• point-to-point

• nondeterministic

• connection-oriented

• collision environment

• first-come, first-served approach

8. Which two devices can provide full-duplex Ethernet connections? (Choose two.)

• hub

• modem

• repeater

• NIC

• Layer 2 switch

9. On a local area network, one workstation can send data on the line while it is receiving data. What type of data transfer does this describe?

• hybrid

• half duplex

• full duplex

• multilink

10.

8451[1]

Refer to the exhibit. The small office network shown in the exhibit consists of four computers connected through a hub. Which configuration would cause collisions and errors on the network?

• autonegotiation

• FastEthernet

• peer-to-peer shared resources

• administratively configured full duplex

11.

8452[1]

Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?

• No collisions will occur on this link.

• Only one of the devices can transmit at a time.

• The switch will have priority for transmitting data.

• The devices will default back to half duplex if excessive collisions occur.

12.

11362[1]

Refer to the exhibit. All hosts are in listen mode. Host 1 and Host 4 both transmit data at the same time. How do the hosts respond on the network? (Choose two.)

• Hosts 1 and 4 may be operating full duplex so no collision will exist.

• The hub will block the port connected to Host 4 to prevent a collision.

• After the end of the jam signal, Hosts 1, 2, 3, and 4 invoke a backoff algorithm.

• Hosts 1 and 4 are assigned shorter backoff values to provide them priority to access the media.

• If a host has data to transmit after the backoff period of that host, the host checks to determine if the line is idle, before transmitting.

13. When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?

• The hosts return to a listen-before-transmit mode.

• The hosts creating the collision have priority to send data.

• The hosts creating the collision retransmit the last 16 frames.

• The hosts extend their delay period to allow for rapid transmission.

14. Which statement describes how CSMA/CD on an Ethernet segment manages the retransmission of frames after a collision occurs?

• The first device to detect the collision has the priority for retransmission.

• The device with the lowest MAC address determines the retransmission priority.

• The devices on the network segment hold an election for priority to retransmit data

• The devices transmitting when the collision occurs DO NOT have priority for retransmission.

15.

8454[1]

Refer to the exhibit. A technician wants to increase the available bandwidth for the workstation by allowing the switch and the NIC on the workstation to transmit and receive simultaneously. What will permit this?

• CSMA/CD

• full-duplex

• FastEthernet

• crossover cable

16. Why do hosts on an Ethernet segment that experience a collision use a random delay before attempting to transmit a frame?

• A random delay is used to ensure a collision-free link.

• A random delay value for each device is assigned by the manufacturer.

• A standard delay value could not be agreed upon among networking device vendors.

• A random delay helps prevent the stations from experiencing another collision during the transmission.

17. In which two layers of the OSI model does Ethernet function? (Choose two.)

• application

• session

• transport

• network

• data link

• physical

18. Which of the following are specified by IEEE standards as sublayers of the OSI data link layer? (Choose two.)

• Logical Link Control

• Logical Layer Control

• Media Access Control

• Logical Link Communication

• Media Access Communication

• Physical Access Communication

19. Where does the MAC address originate?

• DHCP server database

• configured by the administrator

• burned into ROM on the NIC card

• network configuration on the computer

• included in the creation of the processor chip

Answers and Explains

• The frame format is modified as it passes through each switch.
• The frame format remains the same across each Ethernet segment.
• The frame format is modified as the media speed changed at switch B and switch E.
• The frame format is modified as the media material changes between copper and fiber at switch C and switch D.
2. How many hexadecimal digits are in a MAC address?
• 2
• 8
• 12
•16
• 32
3. What are three functions of a NIC in a PC? (Choose three.)
• A NIC connects the PC to the network media.
• A NIC detects collisions on the Ethernet segment.
• A NIC checks the formatting of data before it is transmitted.
• A NIC passes the contents of selected frames to the upper OSI layers.
• A NIC acknowledges and retransmits data that was not received properly.
• A NIC discards frames when the destination IP address does not match the local host.
4. At what layer of the OSI model does a MAC address reside?
• 1
• 2
• 3
• 4
• 7
5. A router has an Ethernet, Token Ring, serial, and ISDN interface. Which interfaces will have a MAC address?
• serial and ISDN interfaces
• Ethernet and Token Ring interfaces
• Ethernet and ISDN interfaces
• Token Ring and serial interfaces
6. In an Ethernet LAN, how does the NIC know when it can transmit data?
• An Ethernet NIC transmits data as soon as the frame is received.
• An Ethernet NIC transmits data as soon as the NIC receives a token.
• An Ethernet NIC transmits data when it senses a collision.
• An Ethernet NIC transmits data after listening for the absence of a signal on the media.
7. Which characteristics describe carrier sense multiple access collision detect (CSMA/CD)? (Choose three.)
• reliable
• point-to-point
• nondeterministic
• connection-oriented
• collision environment
• first-come, first-served approach
8. Which two devices can provide full-duplex Ethernet connections? (Choose two.)
• hub
• modem
• repeater
• NIC
• Layer 2 switch
9. On a local area network, one workstation can send data on the line while it is receiving data. What type of data transfer does this describe?
• hybrid
• half duplex
• full duplex
• multilink
10.
Refer to the exhibit. The small office network shown in the exhibit consists of four computers connected through a hub. Which configuration would cause collisions and errors on the network?
• autonegotiation
• FastEthernet
• peer-to-peer shared resources
• administratively configured full duplex
11.
Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?
• No collisions will occur on this link.
• Only one of the devices can transmit at a time.
• The switch will have priority for transmitting data.
• The devices will default back to half duplex if excessive collisions occur.
12.
Refer to the exhibit. All hosts are in listen mode. Host 1 and Host 4 both transmit data at the same time. How do the hosts respond on the network? (Choose two.)
• Hosts 1 and 4 may be operating full duplex so no collision will exist.
• The hub will block the port connected to Host 4 to prevent a collision.
• After the end of the jam signal, Hosts 1, 2, 3, and 4 invoke a backoff algorithm.
• Hosts 1 and 4 are assigned shorter backoff values to provide them priority to access the media.
• If a host has data to transmit after the backoff period of that host, the host checks to determine if the line is idle, before transmitting.
13. When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?
• The hosts return to a listen-before-transmit mode.
• The hosts creating the collision have priority to send data.
• The hosts creating the collision retransmit the last 16 frames.
• The hosts extend their delay period to allow for rapid transmission.
14. Which statement describes how CSMA/CD on an Ethernet segment manages the retransmission of frames after a collision occurs?
• The first device to detect the collision has the priority for retransmission.
• The device with the lowest MAC address determines the retransmission priority.
• The devices on the network segment hold an election for priority to retransmit data
• The devices transmitting when the collision occurs DO NOT have priority for retransmission.
15.
Refer to the exhibit. A technician wants to increase the available bandwidth for the workstation by allowing the switch and the NIC on the workstation to transmit and receive simultaneously. What will permit this?
• CSMA/CD
• full-duplex
• FastEthernet
• crossover cable
16. Why do hosts on an Ethernet segment that experience a collision use a random delay before attempting to transmit a frame?
• A random delay is used to ensure a collision-free link.
• A random delay value for each device is assigned by the manufacturer.
• A standard delay value could not be agreed upon among networking device vendors.
• A random delay helps prevent the stations from experiencing another collision during the transmission.
17. In which two layers of the OSI model does Ethernet function? (Choose two.)
• application
• session
• transport
• network
• data link
• physical
18. Which of the following are specified by IEEE standards as sublayers of the OSI data link layer? (Choose two.)
• Logical Link Control
• Logical Layer Control
• Media Access Control
• Logical Link Communication
• Media Access Communication
• Physical Access Communication
19. Where does the MAC address originate?
• DHCP server database
• configured by the administrator
• burned into ROM on the NIC card
• network configuration on the computer
• included in the creation of the processor chipRefer to the exhibit. Host A is communicating with host F. What happens to a frame sent from host A to host F as it travels over the Ethernet segments?
• The frame format is modified as it passes through each switch.
• The frame format remains the same across each Ethernet segment.
• The frame format is modified as the media speed changed at switch B and switch E.
• The frame format is modified as the media material changes between copper and fiber at switch C and switch D.
2. How many hexadecimal digits are in a MAC address?
• 2
• 8
• 12
•16
• 32
3. What are three functions of a NIC in a PC? (Choose three.)
• A NIC connects the PC to the network media.
• A NIC detects collisions on the Ethernet segment.
• A NIC checks the formatting of data before it is transmitted.
• A NIC passes the contents of selected frames to the upper OSI layers.
• A NIC acknowledges and retransmits data that was not received properly.
• A NIC discards frames when the destination IP address does not match the local host.
4. At what layer of the OSI model does a MAC address reside?
• 1
• 2
• 3
• 4
• 7
5. A router has an Ethernet, Token Ring, serial, and ISDN interface. Which interfaces will have a MAC address?
• serial and ISDN interfaces
• Ethernet and Token Ring interfaces
• Ethernet and ISDN interfaces
• Token Ring and serial interfaces
6. In an Ethernet LAN, how does the NIC know when it can transmit data?
• An Ethernet NIC transmits data as soon as the frame is received.
• An Ethernet NIC transmits data as soon as the NIC receives a token.
• An Ethernet NIC transmits data when it senses a collision.
• An Ethernet NIC transmits data after listening for the absence of a signal on the media.
7. Which characteristics describe carrier sense multiple access collision detect (CSMA/CD)? (Choose three.)
• reliable
• point-to-point
• nondeterministic
• connection-oriented
• collision environment
• first-come, first-served approach
8. Which two devices can provide full-duplex Ethernet connections? (Choose two.)
• hub
• modem
• repeater
• NIC
• Layer 2 switch
9. On a local area network, one workstation can send data on the line while it is receiving data. What type of data transfer does this describe?
• hybrid
• half duplex
• full duplex
• multilink
10.
Refer to the exhibit. The small office network shown in the exhibit consists of four computers connected through a hub. Which configuration would cause collisions and errors on the network?
• autonegotiation
• FastEthernet
• peer-to-peer shared resources
• administratively configured full duplex
11.
Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?
• No collisions will occur on this link.
• Only one of the devices can transmit at a time.
• The switch will have priority for transmitting data.
• The devices will default back to half duplex if excessive collisions occur.
12.
Refer to the exhibit. All hosts are in listen mode. Host 1 and Host 4 both transmit data at the same time. How do the hosts respond on the network? (Choose two.)
• Hosts 1 and 4 may be operating full duplex so no collision will exist.
• The hub will block the port connected to Host 4 to prevent a collision.
• After the end of the jam signal, Hosts 1, 2, 3, and 4 invoke a backoff algorithm.
• Hosts 1 and 4 are assigned shorter backoff values to provide them priority to access the media.
• If a host has data to transmit after the backoff period of that host, the host checks to determine if the line is idle, before transmitting.
13. When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?
• The hosts return to a listen-before-transmit mode.
• The hosts creating the collision have priority to send data.
• The hosts creating the collision retransmit the last 16 frames.
• The hosts extend their delay period to allow for rapid transmission.
14. Which statement describes how CSMA/CD on an Ethernet segment manages the retransmission of frames after a collision occurs?
• The first device to detect the collision has the priority for retransmission.
• The device with the lowest MAC address determines the retransmission priority.
• The devices on the network segment hold an election for priority to retransmit data
• The devices transmitting when the collision occurs DO NOT have priority for retransmission.
15.
Refer to the exhibit. A technician wants to increase the available bandwidth for the workstation by allowing the switch and the NIC on the workstation to transmit and receive simultaneously. What will permit this?
• CSMA/CD
• full-duplex
• FastEthernet
• crossover cable
16. Why do hosts on an Ethernet segment that experience a collision use a random delay before attempting to transmit a frame?
• A random delay is used to ensure a collision-free link.
• A random delay value for each device is assigned by the manufacturer.
• A standard delay value could not be agreed upon among networking device vendors.
• A random delay helps prevent the stations from experiencing another collision during the transmission.
17. In which two layers of the OSI model does Ethernet function? (Choose two.)
• application
• session
• transport
• network
• data link
• physical
18. Which of the following are specified by IEEE standards as sublayers of the OSI data link layer? (Choose two.)
• Logical Link Control
• Logical Layer Control
• Media Access Control
• Logical Link Communication
• Media Access Communication
• Physical Access Communication
19. Where does the MAC address originate?
• DHCP server database
• configured by the administrator
• burned into ROM on the NIC card
• network configuration on the computer
• included in the creation of the processor chip
Advertisements

Make a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

2 Responses to “Module 6 Exam”

RSS Feed for IT Certifications Comments RSS Feed


Where's The Comment Form?

Liked it here?
Why not try sites on the blogroll...

%d bloggers like this: