CIDR network address

Posted on October 1, 2009. Filed under: CCNA, ICND1 break down |

As the growth of public networks, we are facing shortage of the 32-bit IPv4 addresses. The Class A and Class B address category were nearly depleted at the time. Although there are still numerous Class C network addresses, Class C addresses are limited to 254 hosts, which is too few for large organizations.

To address the IP address shortage issue, solutions have been developed in the past 20 years. One of them is IPv6, which is a 128-bit binary number and provides far more addresses than IPv4. Another solution is CIDR, which is a classless address scheme and allows for more efficient allocation of IP addresses.

A CIDR network address looks like this:

where /22 means the first 22 bits are the network part of the address, and the remaining 10 bits are the host part of the address.

The advantage of CIDR allows route aggregation, also known as supernetting. That is, CIDR can aggregate multiple smaller classful networks into a single larger network. In the above example, suppose we need to assign IP address to a network which have 700 hosts.  A Class C address can only provide 254 hosts, not meet our requirement. On the other hand, if we assign a Class B address to the network, it is too wasteful. A Class B address can support 65,534 hosts, but we only use 700 hosts. In stead of using classful address scheme, we use CIDR address instead. By doing so, we aggregated many class C networks into a single /22 address, which can have 1022 hosts in it. Our requirement is met without using a Class B address.

Maybe, your ISP is using CIDR right now. Your ISP might own a large address block such as, which consists of many Class C networks. The ISP assigns a small chunck of network to you, say network. The network allows you to have 510 hosts. (You can subdivide your network into even smaller chuncks such as,, and assign them to your own subnetworks.) In this example, your ISP takes the responsibility of managing the IP addresses within network, so that internet routers only need to keep this single summary route ( ), or supernet route, in order to route packets to your ISP’s network. After packets get into your ISP’s intranet, it is your ISP’s intranet routers, that then keep the routes that are more specific to its customers’ networks.

ICND1 and ICND2 break down


Make a Comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

3 Responses to “CIDR network address”

RSS Feed for IT Certifications Comments RSS Feed

[…] IP Addressing and Binary Conversions * IP Address Classes * Private IP Address Ranges * CIDR network address * Intro to the Routing Process * Routing Process Continued — Behind the “PING” * Basic Router […]

[…] xxxxx http// […]

Where's The Comment Form?

Liked it here?
Why not try sites on the blogroll...

%d bloggers like this: